Cold Fire® is a environmentally friendly rapid cooling fire suppressing agent, leading the way in fire fighting technology and revolutionizing the way fire fighters combat fires!
FireFreeze
Worldwide, Inc.
272 Route 46 East
Rockaway, NJ 07866
Phone: 973-627-0722
Fax: 973-627-2982
Cold Fire® gets its name from its extraordinary ability to remove HEAT from any object in which it comes in contact. The suppressants in Cold Fire® act as encapsulators that use water as a catalyst to remove heat and work to encapsulate the fuel source from a fire.
Why Use Cold Fire?
- UL Listed Wetting Agent for Class A & B Fires
- EPA-SNAP Listed
- Considered an acceptable substitute to toxic foams and Halon 1211
- Non-Toxic
- Non-Corrosive-product can be dumped directly into booster tank.
- No need to flush out lines
- Biodegradable
- Prevents Re-ignition When Properly Applied
- Reduces Density of Hydrocarbon Smoke
- No Messy Clean Up
- Non-Slip
- Indefinite Shelf Life
Industries Which Use Cold Fire:
- Federal, State, City & Local Fire, EMS, and Police Departments.
- Military/Governmental Entities
- Port Authorities
- Aviation & Marine Industry
- Manufacturing Facilities
- Trade Industry – Plumbing, Welding, Roofing
- Motorized Racing Industry
- Foundries
- Forestry
- Correctional Facilities
- Paper & Textile Industry
- Mining Industry
- Oil Refineries / Petrochemical
- Steel Industry
See actual video demonstrations of COLDFIRE®.
2.2 megabyte file for 1 minute 17 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 16 minutes to download at 28.8 modem speed.
16 megabyte file for 1 minute 45 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 17 minutes to download at 28.8 modem speed.
17 megabyte file for 1 minute 45 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 18 minutes to download at 28.8 modem speed.
12 megabyte file for 1 minute 10 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 15 minutes to download at 28.8 modem speed.
11.4 megabyte file for 1 minute 10 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 16 minutes to download at 28.8 modem speed.
10.2 megabyte file for 1 minute 10 second Quicktime™ Video Clip. Requires browser to have the Quicktime Plug-In. File will take approximately 16 minutes to download at 28.8 modem speed.
Bulk Applications:
COLD FIRE® is added to pump apparatus, reservoirs, or inducted into fire hose lines to attack large fires.
Application Pressure: Pump – Use 150-175 psi: Nozzle – Use 100-110 psi (fog nozzle is usually recommended)
NO SPECIAL EQUIPMENT IS REQUIRED.
PERCENTAGES:
Class A: 1-3%
(0.5% can be used on brush fires.)
Class B: 3-6%
Class D: 6-10%
Cold Fire® is sold in 5 and 55 gallon drums.
PORTABLE EXTINGUISHERS:
COLD FIRE® can be used in 2.5 gallon water extinguishing units for first response. One quart of COLD FIRE is added to 8 quarts of water to equal a 10% solution. Always add COLD FIRE® last to the mixture! Unit should be pressurized to 125 psi. A aerated nozzle is recommended.
CLOSED LOOP SYSTEMS:
COLD FIRE® can also be used in closed loop systems, sprinkler systems, and on-board systems for automobile, motorized racing, aviation, rail and boating industries.
For additional application information, please click here.